technology & solution

Rolling mill rolls manufacturer

LMM GROUP Rolling mill rolls production factory have two roll production lines with world leading advantages: One is for cast rolls with the annual capacity of 50,000 tons; the other is for forged rolls with the annual capacity of 5,000 tons. We have advanced production and testing equipment at home and abroad and professional research & development team.

rolling mill rolls
rolling mill rolls
rolling mill rolls

Adamite rolls

Brand name: LMM GROUP
Packing Details : Wooden box with fumigation or Wooden Fram
Delivery Details: 30~60days or Based on the quantity
Shipping: Sea freight、Land freight、Air freight

LMM GROUP have been supplied to world’s top steel manufacturer :

Australia: Liberty steel/Bluescope steel
Iran: Oxin steel
Italy: JSW steel
United Arab EmiratesEmirates Steel
Egypt:Ezz Steel
Russia:MMK,Mechel, NLMK
Luxembourg:RIVA Group,ArcelorMittal
Turkey: Tosyalı Holding,İçdaş,Erdemir Group
Spain: Liberty Steel Group,CELSA Steel Group
India: tata-steel,SAIL, SPL,Erdemir Group etc. We do OEM for Concast and Danieli for a long time

Manufacture drawing
Process schedule with ETD date
QC checking of each process
Checking report
Photos &videos of each process
ISO 9001 certificate
Warranty Time
The third party Checking

The rolls are produced by static and monobloc casting method. The scope of supply is suitable to all dimensions of rolls. The products are mainly applied to section mill, bar mill and wire-rod mill, rail mill, universal mill breakdown stand, roughing stands of hot strip mill, back-up rolls of hot strip mill, vertical rolls and so on.

The adamite rolls also called adamite Steel Rolls has better strength and toughness than cast iron roll. It is widely used for work rolls in hot rolling mills. The adamite rolls are statically cast and go through a multi-stage heat treatment process followed by Tempering phases in order to develop the combination of hardness, toughness and wear resistance.

Adamite rolls chemical composition
The adamite roll materials can be considered as composite materials of two phases of coarse carbides and matrix. As a consequence, the hardness of these roll materials may be markedly affected by the amount and hardness of coarse carbides.
The products covered all the Adamite /GST material with “C” contents of 1.0%-2.2%.

Typical Chemical Analysis,Physical Properties:

Material C Mn Ni Cr Mo Barrel Hardness   Neck Hardness Tensile Strength
140 CrNiMo 1.30-1.50 0.70-1.50 0.20-1.20 0.80-1.20 0.20-1.00 35~50   ≤50 >590
160 CrNiMo 1.50-1.70 0.70-2.00 0.20-1.50 0.80-1.50 0.20-1.00 45~56   ≤50 >490
180 CrNiMo 1.70-1.90 0.70-2.00 0.50-2.00 0.80-1.50 0.20-1.00 50~65   ≤50 >450
200 CrNiMo 1.90-2.10 0.80-2.00 1.0-3.0 1.00-2.50 0.30-1.50 55~68   ≤50 >450

Product testing

Product packaging

Product production process

Static Cast Rolls

Centrifugal Cast Rolls

Forged Rolls

Production equipment

Technical excellence in our core competencies – melting, casting, forging, heat treating and machining – allows us to provide a superior product and meet the most demanding requirements of our customers.

Meet the largest specification of casting roll Φ1400X4600X9000

  • 20T/30T dual power inverter intermediate frequency electric furnace
  • lOT, 5T, 3T intermediate frequency electric furnace, a total of 8
  • 60T LF ladle slightly smelting furnace
  • 60TVD vacuum refining furnace
  • V.C vacuum casting furnace
  • Equipped with advanced Spraying and sand casting equipment

Strictly control the uniformity of furnace temperature to ensure the consistency of roll hardness.

The equipments all use computer centralized control automation system

  • 30 numerically controlled resistance high low temperature heat treatment furnaces
  • Spray quenching equipment
  • Open differential temperature heat treatment furnaces
  • Gas baking furnaces

To meet various precision and requirements Equipped with:

  • Over 20 large-sized imported NC grinding machines
  • Large-medium sized NC lathes
  • Large-medium sized NC planer-type double-side milling machines
  • As well as over 100 dedicated lathes for various rolls of C61250, C61200, C61125, C84180, C84160, C8463, C8440 and C91250 and etc.

Whole process quality and inspection system from raw materials to finished rolls

The whole process implements computer information collection and feedback processing.

Equipped with

  • American Leco CS230 carbon and sulfur analyzer,
  • German Bruker Q8 direct reading spectrometer,
  • Japanese Shimadzu MNV-2T golden microscope,
  • German KK USD12 ultrasonic flaw detector, and etc.

Product Brochure Download

About LMM

Founded in 2007, LMM GROUP mainly produces all kinds of metallurgical rolls for various types of steel, bar, high-speed wire and strip hot and cold plate and strip rolling mills.

The company covers an area of 100,000 square meters, including two complete production lines for cast rolls and forged steel rolls, processing workshops, product research and development centers, testing centers, training centers and office buildings and other supporting facilities. The factory environment is very beautiful.

We can provide characteristic service and differentiated products according to the different conditions of rolling mill.

Get a quote quickly

Get in touch today and receive a complimentary consultation for refractory material

Get A Free Consultation
And Estimate