[vc_row][vc_column][vc_column_text]
Magnesia Carbon Bricks
Magnesia Carbon Brick is a resin-bonded brick produced from dead-burned or fused magnesia and graphite. Anti-oxidant is also added if needed. Magnesia-Carbon brick works well in thermal resistance, corrosion, resistance, and spalling resistance.
Where it is used ?
Magnesia Carbon Brick is used in converters, EAFs ( Electric Arc Furnaces ), ladles and refining furnaces.
Magnesia-Alumina Carbon Brick
Magnesia-Alumina Carbon Brick or Alumina-Magnesia Carbon Brick is produced from high quality bauxite, corundum, fused magnesia and graphite. Alumina-Magnesia Carbon brick has proper residual expansion, low thermal conductivity, and better insulation performance than that of Magnesia-Alumina Carbon brick which contain much more magnesia.
Where it is used ?
It is used in the slag line of the ladle, lower part of the ladle wall, ladle bottom and free zone of the ladle.
Magnesia-Calcium Carbon Brick
Magnesia-Calcium Carbon Brick is produced from good quality magnesia, dolomite clinker and synthetic magnesia dolomite clinker. It is a good resistant of slag and has a good stability in high-temperature vacuum working environment and can also purify the liquid steel
Where it is used ?
It is used mainly in refining furnaces such as UOD, AOD and LF ( Ladle Furnace ).
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_btn title=”About LMM GROUP” link=”url:https%3A%2F%2Fwww.lmmgroupcn.com%2Fabout-lmm%2F|target:_blank”][vc_column_text css=”.vc_custom_1649296177864{margin-top: 50px !important;}”]friendship Link：
LMM Totai Refractory, LMM Mill ROLLS, LMM CCM, LMM Mechanical Equipment, Intelligent industry, STEEL Metallurgy Industry[/vc_column_text][/vc_column][/vc_row]
