technology & solution
LMM GROUP Rolling mill rolls production factory have two roll production lines with world leading advantages: One is for cast rolls with the annual capacity of 50,000 tons; the other is for forged rolls with the annual capacity of 5,000 tons. We have advanced production and testing equipment at home and abroad and professional research & development team.
Provide value-added, green and intelligent one-stop solutions and services to customers in global steel, metallurgy industries
LMM GROUP overseas warehouses and branches have been successively established in the United States, Switzerland, Mexico, Germany, Iran, Turkey and other countries. And our products have been exported to more than 90 countries and regions in the Americas, Europe, Southeast Asia, the Middle East, Africa, and Asia. It has formed strong core competitiveness in the fields of steelmaking, continuous casting, and rolling products, and provides high-end customers with high-quality products and Serve.
Cold Strip Mill
Hot Strip Mill
Plate Mill
Bar or Wire Mill
Cast lron Rolls
Cast Steel Rolls
LMM GROUP ROLLS SERVICE
1
* Inquiry and consulting support. * Planning layout and Design requires machinery. * Welcome visit our Factory. * The production process and before leaving the factory, all performance indicators are strictly tested, and the professional QC team controls according to the process.
2
* Engineers available to service machinery overseas. * IN-TIME delivery goods. * The quality is tracked throughout the process, and the installation and use are guided throughout the process. * Long-term technical support. * Stick to the agreement, do not do anything that violates the agreement, stick to the spirit of the contract to the end.
Our team of experts
With decades of proven experience, our team is prepared to help you achieve your goals, and beyond.
LMM have been supplied to world’s top steel manufacturer Arcelormittal, TATA Steel, NLMK, MMK, etc. We do OEM for Concast and Danieli for a long time
our partners trust us
A STEEL
“On September 10, 2015, in the rolling process of the steel rolling mill, the LMMGROUP high-speed steel bar rolling experiment was carried out on the first bar line C12 to four cuts, and C14 three cuts to K1, K2, K3, and K4. According to the trial situation, The average amount of steel passing through LMMGROUP rolling is about 50%-60% of the alloy rolling spoke. The processing difficulty of high-speed steel is low, and the processing cost is lower than that of the alloy rolling wheel. Our factory can achieve normal processing.”
B STEEL
“The trial data shows that the ∮370mm high-speed steel roll produced by LMMGROUP has far exceeded the single-groove assessment value of 1,500 tons in the “Roll Ordering Technical Agreement”, and the effect is good.”
LMMGROUP provides our factory with 8 @380×650 high-speed steel rolls for K1 (finishing), K2 (pre-finishing), K3 (slicing), K4 (pre-slicing), which are used to make 12mm rebar. After the first online use: K1 single-channel steel throughput averaged 410 tons, K2 single-channel steel throughput averaged 840 tons, K3 single-channel steel throughput was 2860 tons, and K4 single-channel steel throughput was 2910 tons. There is no abnormal condition in the groove, and the hardness of the wheel is uniform, which is convenient for the repair and processing of the groove. During the period, LMMGROUP sent relevant technical personnel to follow up and guide on-site, and the effect was better in our factory.
ARE YOU HAVE A PURCHASING PLAN?– CONTACT US TO GET BEST PLAN.
Special product design, please send specific data and drawings to our mailbox or form