[vc_row][vc_column][vc_column_text]There are many varieties of high-speed wire rods, especially high-quality special steel varieties such as bearing steel, welding wire steel, cord steel, cold spade steel, spring steel, etc., which require higher surface quality of hot-rolled coils. If there are defects such as scratches on the surface, it will not only cause the final parts of the wire rod to be unqualified, but also may cause breakage during the drawing process, which will have a greater impact on the processing of downstream enterprises and also cause raw material factories. A certain loss. Therefore, steel mills need to protect the positions on the two sides of the high-speed wire rods to reduce the scratch rate of the wire rods.
In order to solve this problem and improve the quality of high-quality special steel wire rods, steel mills currently use manual operations, using cardboard, sack cloth, chemical fiber felt, and plastic backing plates as wire rod corner protection gaskets. Protect it. However, some steel mills are limited by factors such as high temperature of the wire rod and worker safety, and passively choose not to protect the excellent steel wire rod.
At present, steel mills are protecting the corners of special steel wire rods. The corner protection gaskets selected are cardboard, sack cloth, chemical fiber felt, plastic backing plates and other materials. There are tens of millions of excellent steel wire rods that need to be protected every year. , It will inevitably consume a large amount of ecological resources and produce hazardous materials that cause damage to the environment. At the same time, downstream users are also trapped in the treatment of solid waste.
For the first time in the industry, our company uses metal materials as wire rod corner protection gaskets. Aluminum or steel sheets are used to protect high temperature wire rods; steel sheet gaskets can be directly pickled. 500~1000 pieces of gaskets are in one roll, which is convenient for the automatic continuous operation of the machine. 8 rolls can continuously protect 500~1000 bundles of wire rods, reducing on-site operation workers and keeping workers away from dangerous areas.
For the first time in the industry, our company uses metal materials as wire rod corner protection gaskets. Aluminum or steel sheets are used to protect high temperature wire rods; steel sheet gaskets can be directly pickled. 500~1000 pieces of gaskets are in one roll, which is convenient for the automatic continuous operation of the machine. 8 rolls can continuously protect 500~1000 bundles of wire rods, reducing on-site operation workers and keeping workers away from dangerous areas.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_video link=”https://youtu.be/vufkTZObWWE”][/vc_column][/vc_row]