Burner controller
Product Categories
LMM Solution for Heating Furnace:
Typical Leading Product
Furnace roller
Radiant tube
Charging/Discharging Roller Table
Charging/Discharging Machine
Walking Beam Mechanisim
Furnace Heaters
Normalizing furnace, tempering furnace, trolley furnace and other annealing furnaces
MFD258-5/1W
1. Can control any power gas burner (ignition power not more than 350KW)
2. Can use ionization or ultraviolet flame monitoring mode
3. Can be used for single-electrode or double-electrode burner operation
4. Multi-function key displays operation status, fault information and flame intensity
5. Remote or on-site reset
6. Can use the conversion switch to select two modes: re-ignition after flame failure is extinguished or lock alarm
7. There are two sets of feedback: normal and fault Feed output
8. Flame monitoring threshold current is adjustable
9. Working voltage 220V, power 10VA
10. MFD258 ignition cable maximum length 5m, recommended <1m
11. Cable ionization monitoring mode maximum length 75m, UV mode maximum length 100m
12. Output current: each maximum 2A
13. Ambient temperature -20℃~+60℃, no condensation allowed
14. Multiple installation methods, can be installed on DIN rail
15. Protection level IP5 4, weight 640 g
16. The burner controller and ignition transformer can be integrated in the ignition control box. Our company can provide integrated
MFD 258 is used to control the ignition and flame monitoring of burners. It can control combustion air burners or gas burners, single valve control, and can also be used in systems that do not require purging or are controlled by other control systems. It is widely used in industrial heat treatment heating systems such as steel, nonferrous metals, machinery, glass, ceramics, plastics and chemicals. It complies with European gas safety standards EN 298.