Flame detector
Product Categories
LMM Solution for Heating Furnace:
Typical Leading Product
Furnace roller
Radiant tube
Charging/Discharging Roller Table
Charging/Discharging Machine
Walking Beam Mechanisim
Furnace Heaters
Continuous annealing, galvanizing, bell-type furnace
UV10
Spectral response range: 190-270nm
Maximum response spectral range: 21010nm
Minimum DC current signal: 1A
Protective lens is a convex lens with dual functions of focusing and heat insulation
Ambient temperature: -40℃-+80℃;
Working life: 10,000 hours
Protection level: IP65; Weight: 400g
Distance between UV probe and controller: 50m
Front-end installation interface: Standard Rp1/2, can be customized according to customer needs
The working voltage of the UV sensor is 220VAC. When UV light is detected, an AC signal is generated inside the sensor. This AC signal is rectified by the rectifier and becomes a DC signal, which is sent to the flame monitor main controller. The main controller will only respond to the DC signal.
The UV sensor must be kept dry and away from heat sources. The quartz lens in front of the probe can effectively keep the sensor away from the hot furnace atmosphere. If necessary, cooling air can also be introduced in front of the probe.