Rotating Diameter 360
Product Categories
Laser Scanning Rotary Diameter Gauge 360
LMM diameter gauge:
Application scenarios: new and old rolling line bars, high-speed bar (rebar) production lines, bar steel, spring flat, square steel production lines can all be used.
Use value:
1. Timely discover cross-sectional defects such as abnormal dimensions, bulges, ears, misalignment, and underfilling, and timely adjust the process to reduce losses and accidents.
2. Replace manual measurement, real-time and accurate, and reduce the risk of artificial heat
3. Better control of dimensional deviation, reduce losses, increase production, and increase profits.
The geometric dimensions of red-hot high-speed wire rods, square steel, flat steel, etc. are detected online in real time, and the detection results are transmitted to the display terminal in real time.
When the measurement data is abnormal, the system will issue an audible and visual alarm. Provide intelligent external dimension detection services for steel rolling.
Detection type: Bars, wires, square steel, flat steel
Measuring principle: laser scanning method;
Measuring method: rotary measurement;
Measuring frequency: 800-1600;
Rotation speed: ≥30 rpm;
Installation method: hoisting or mobile
Standard configuration of the whole set of equipment: control cabinet, measuring vehicle, electrical control box, LED display, cooling and dust removal system and supporting facilities.
Applicable rolling speed: ≤120m/s
Applicable rolling temperature: ≤1200℃
Measuring range: 5-60mm
Allowable deviation: ≤±0.015
Installation position: after pre-finishing mill, after finishing mill, after sizing
Comparison with peers
High measurement frequency: 2800HZ (400-1000 in the same industry)
Fast response speed: 1/12500s (1/8000 in the same industry)
